Logo Search packages:      
Sourcecode: tcpdump version File versions

print-fddi.c

/*
 * Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997
 *    The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that: (1) source code distributions
 * retain the above copyright notice and this paragraph in its entirety, (2)
 * distributions including binary code include the above copyright notice and
 * this paragraph in its entirety in the documentation or other materials
 * provided with the distribution, and (3) all advertising materials mentioning
 * features or use of this software display the following acknowledgement:
 * ``This product includes software developed by the University of California,
 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
 * the University nor the names of its contributors may be used to endorse
 * or promote products derived from this software without specific prior
 * written permission.
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 */

#ifndef lint
static const char rcsid[] _U_ =
    "@(#) $Header: /tcpdump/master/tcpdump/print-fddi.c,v 1.61.2.2 2003/11/16 08:51:20 guy Exp $ (LBL)";
#endif

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <tcpdump-stdinc.h>

#include <pcap.h>
#include <stdio.h>
#include <string.h>

#include "interface.h"
#include "addrtoname.h"
#include "ethertype.h"

#include "ether.h"
#include "fddi.h"

/*
 * Some FDDI interfaces use bit-swapped addresses.
 */
#if defined(ultrix) || defined(__alpha) || defined(__bsdi) || defined(__NetBSD__) || defined(__linux__)
int   fddi_bitswap = 0;
#else
int   fddi_bitswap = 1;
#endif

/*
 * FDDI support for tcpdump, by Jeffrey Mogul [DECWRL], June 1992
 *
 * Based in part on code by Van Jacobson, which bears this note:
 *
 * NOTE:  This is a very preliminary hack for FDDI support.
 * There are all sorts of wired in constants & nothing (yet)
 * to print SMT packets as anything other than hex dumps.
 * Most of the necessary changes are waiting on my redoing
 * the "header" that a kernel fddi driver supplies to bpf:  I
 * want it to look like one byte of 'direction' (0 or 1
 * depending on whether the packet was inbound or outbound),
 * two bytes of system/driver dependent data (anything an
 * implementor thinks would be useful to filter on and/or
 * save per-packet, then the real 21-byte FDDI header.
 * Steve McCanne & I have also talked about adding the
 * 'direction' byte to all bpf headers (e.g., in the two
 * bytes of padding on an ethernet header).  It's not clear
 * we could do this in a backwards compatible way & we hate
 * the idea of an incompatible bpf change.  Discussions are
 * proceeding.
 *
 * Also, to really support FDDI (and better support 802.2
 * over ethernet) we really need to re-think the rather simple
 * minded assumptions about fixed length & fixed format link
 * level headers made in gencode.c.  One day...
 *
 *  - vj
 */

static u_char fddi_bit_swap[] = {
      0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
      0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
      0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
      0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
      0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
      0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
      0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
      0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
      0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
      0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
      0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
      0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
      0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
      0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
      0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
      0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
      0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
      0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
      0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
      0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
      0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
      0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
      0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
      0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
      0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
      0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
      0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
      0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
      0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
      0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
      0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
      0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
};

/*
 * Print FDDI frame-control bits
 */
static inline void
print_fddi_fc(u_char fc)
{
      switch (fc) {

      case FDDIFC_VOID:                         /* Void frame */
            printf("void ");
            break;

      case FDDIFC_NRT:                          /* Nonrestricted token */
            printf("nrt ");
            break;

      case FDDIFC_RT:                           /* Restricted token */
            printf("rt ");
            break;

      case FDDIFC_SMT_INFO:                     /* SMT Info */
            printf("info ");
            break;

      case FDDIFC_SMT_NSA:                      /* SMT Next station adrs */
            printf("nsa ");
            break;

      case FDDIFC_MAC_BEACON:                   /* MAC Beacon frame */
            printf("beacon ");
            break;

      case FDDIFC_MAC_CLAIM:                    /* MAC Claim frame */
            printf("claim ");
            break;

      default:
            switch (fc & FDDIFC_CLFF) {

            case FDDIFC_MAC:
                  printf("mac%1x ", fc & FDDIFC_ZZZZ);
                  break;

            case FDDIFC_SMT:
                  printf("smt%1x ", fc & FDDIFC_ZZZZ);
                  break;

            case FDDIFC_LLC_ASYNC:
                  printf("async%1x ", fc & FDDIFC_ZZZZ);
                  break;

            case FDDIFC_LLC_SYNC:
                  printf("sync%1x ", fc & FDDIFC_ZZZZ);
                  break;

            case FDDIFC_IMP_ASYNC:
                  printf("imp_async%1x ", fc & FDDIFC_ZZZZ);
                  break;

            case FDDIFC_IMP_SYNC:
                  printf("imp_sync%1x ", fc & FDDIFC_ZZZZ);
                  break;

            default:
                  printf("%02x ", fc);
                  break;
            }
      }
}

/* Extract src, dst addresses */
static inline void
extract_fddi_addrs(const struct fddi_header *fddip, char *fsrc, char *fdst)
{
      register int i;

      if (fddi_bitswap) {
            /*
             * bit-swap the fddi addresses (isn't the IEEE standards
             * process wonderful!) then convert them to names.
             */
            for (i = 0; i < 6; ++i)
                  fdst[i] = fddi_bit_swap[fddip->fddi_dhost[i]];
            for (i = 0; i < 6; ++i)
                  fsrc[i] = fddi_bit_swap[fddip->fddi_shost[i]];
      }
      else {
            memcpy(fdst, (const char *)fddip->fddi_dhost, 6);
            memcpy(fsrc, (const char *)fddip->fddi_shost, 6);
      }
}

/*
 * Print the FDDI MAC header
 */
static inline void
fddi_hdr_print(register const struct fddi_header *fddip, register u_int length,
         register const u_char *fsrc, register const u_char *fdst)
{
      const char *srcname, *dstname;

      srcname = etheraddr_string(fsrc);
      dstname = etheraddr_string(fdst);

      if (vflag)
            (void) printf("%02x %s %s %d: ",
                   fddip->fddi_fc,
                   srcname, dstname,
                   length);
      else if (qflag)
            printf("%s %s %d: ", srcname, dstname, length);
      else {
            (void) print_fddi_fc(fddip->fddi_fc);
            (void) printf("%s %s %d: ", srcname, dstname, length);
      }
}

static inline void
fddi_smt_print(const u_char *p _U_, u_int length _U_)
{
      printf("<SMT printer not yet implemented>");
}

void
fddi_print(const u_char *p, u_int length, u_int caplen)
{
      const struct fddi_header *fddip = (const struct fddi_header *)p;
      struct ether_header ehdr;
      u_short extracted_ethertype;

      if (caplen < FDDI_HDRLEN) {
            printf("[|fddi]");
            return;
      }

      /*
       * Get the FDDI addresses into a canonical form
       */
      extract_fddi_addrs(fddip, (char *)ESRC(&ehdr), (char *)EDST(&ehdr));

      if (eflag)
            fddi_hdr_print(fddip, length, ESRC(&ehdr), EDST(&ehdr));

      /* Skip over FDDI MAC header */
      length -= FDDI_HDRLEN;
      p += FDDI_HDRLEN;
      caplen -= FDDI_HDRLEN;

      /* Frame Control field determines interpretation of packet */
      extracted_ethertype = 0;
      if ((fddip->fddi_fc & FDDIFC_CLFF) == FDDIFC_LLC_ASYNC) {
            /* Try to print the LLC-layer header & higher layers */
            if (llc_print(p, length, caplen, ESRC(&ehdr), EDST(&ehdr),
                &extracted_ethertype) == 0) {
                  /*
                   * Some kinds of LLC packet we cannot
                   * handle intelligently
                   */
                  if (!eflag)
                        fddi_hdr_print(fddip, length + FDDI_HDRLEN,
                            ESRC(&ehdr), EDST(&ehdr));
                  if (extracted_ethertype) {
                        printf("(LLC %s) ",
                  etherproto_string(htons(extracted_ethertype)));
                  }
                  if (!xflag && !qflag)
                        default_print(p, caplen);
            }
      } else if ((fddip->fddi_fc & FDDIFC_CLFF) == FDDIFC_SMT)
            fddi_smt_print(p, caplen);
      else {
            /* Some kinds of FDDI packet we cannot handle intelligently */
            if (!eflag)
                  fddi_hdr_print(fddip, length + FDDI_HDRLEN, ESRC(&ehdr),
                      EDST(&ehdr));
            if (!xflag && !qflag)
                  default_print(p, caplen);
      }
}

/*
 * This is the top level routine of the printer.  'p' points
 * to the FDDI header of the packet, 'h->ts' is the timestamp,
 * 'h->length' is the length of the packet off the wire, and 'h->caplen'
 * is the number of bytes actually captured.
 */
u_int
fddi_if_print(const struct pcap_pkthdr *h, register const u_char *p)
{
      fddi_print(p, h->len, h->caplen);

      return (FDDI_HDRLEN);
}

Generated by  Doxygen 1.6.0   Back to index